Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Configuring DTCs Step-by-Step
Modify the Network Management Configuration File
Chapter 3
73
List name The name of the list to be reviewed, added, modified, deleted, or
renamed.
New name The new name for the list. Required only when renaming a list.
List Names Display only. Lists the name of existing PAD Access Lists. Up to 10
lists.
Step 7: Create and Modify the PAD Access Lists
The PAD Access List screen is used to define Nodes from the Nodes Names list that are
contained in a PAD Access List. Figure x.x shows a typical Access List.
Figure 3-6 PAD Access List Screen
The Node Name fields are display only. These fields display all the nodes that are in the
Nodes Names list.
1. To add a node to the list, press the
[TAB}
key until the cursor is next to the node
name you want to add to the list. Enter an ‘X’ in the In list field.
2. If there are more than 16 nodes defined in the Node Names list, press the
[Next Page]
key to move forward on the pages, or the
[Prev Page]
key to move back on the pages of
the screen until you see the node name you want to add to the list.
3. To remove a node from the list, press the
[TAB]
key until the cursor is at the ‘X’ for
the node you wish to delete. Type a
[Space
] to remove the ‘X’ from the In List field.
4. When the list contains the nodes you want in this list, press the
[Save Data]
key.