Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Configuring DTCs Step-by-Step
Modify the Network Management Configuration File
Chapter 3
72
Step 6: PAD Access List Selection
The PAD Access List Selection screen lists the PAD Access lists available in your
configuration file. To reach this screen, press the
[Go to LIST]
key at the DTS Node List
screen. From this PAD Access List Selection screen, you may review, add, delete, or
modify Access Lists. You can create up to 10 lists.
Figure 3-5 PAD Access List Selection Screen
1. Enter the list name in the List Name field.
2. If you are deleting an Access List, press the
[Delete List]
key. You must press the key
again to confirm the deletion. You are done. Exit this screen by pressing the
[Prior
Screen]
key.
3. If you are renaming an Access List, enter the new list name in the New name field
and press
[Rename List]
. You are done Exit this screen by pressing the
[Prior Screen]
key.
4. If you are creating a new Access List, press the
[Add List]
key. This will take you to
the PAD Access List screen. Proceed to Step 7 Create and Modify the PAD Access
Lists.
5. If you are modifying or reviewing an Access List, press the
[Modify List]
key. This will
take you to the PAD Access List screen. Proceed to Step 7: Create and Modify the
PAD Access Lists.
Fields