Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Configuring DTCs Step-by-Step

Modify the Network Management Configuration File

Chapter 3

4. When you have entered all the desired node names, press the

[Go to List]

key to begin

defining the PAD access lists. Proceed to step 6: Create PAD Access Lists.

Fields

Node Name The local NS node name that the system is known by on the network or

the IP address that is configured for that node. The format of the NS

node name is nodename.domain.organization. The format of IP is

xxx.xxx.xxx.xxx where xxx is a number from 1 to 255. You can enter

a maximum of 32 node names.

Press Delete Data This field designates the record number of the node name that will

be deleted when the

[Delete Data]

function key is pressed.

Soft Keys

Go To List

Takes you to the PAD Access List Selection screen where you can

create or edit PAD access lists.

Delete Data

Deletes the node name whose record number is currently entered in

the ‘Press Delete Data field’. This will also delete this node from ALL

the Access lists. The Node names and Access lists will be compressed

so that there are no blank entries in the middle of the lists.

Save Data

This key will add the node name currently in the Node Name field to

the end of the list.