Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Preparing to Configure DTCs
Configuring Worksheets
Chapter 2
54
DTC X.25 Card Configuration – Nailed PAD Worksheet
Fill out worksheet as shown in DTC X.25 Card Configuration Nailed PAD Worksheet for
each DTC X.25 Network Access card for which you are configuring nailed PAD
connections.
Figure 2-9 DTC X.25 Card Configuration Nailed PAD Connections Worksheet
DTC X.25 Card Configuration
Nailed PAD Connections Worksheet
DTC Name: _____________ Card Number:____
Remote Device (PAD) CUG No.
Ldev Profile Device Name X.25 Address (Optional)
_____ __________ ____________ _____________________ ______
_____ __________ ____________ _____________________ ______
_____ __________ ____________ _____________________ ______
_____ __________ ____________ _____________________ ______
_____ __________ ____________ _____________________ ______
_____ __________ ____________ _____________________ ______
_____ __________ ____________ _____________________ ______
_____ __________ ____________ _____________________ ______
Note: The
X.25 address
and
CUG
fields do not apply if this DTC is a non-
managed DTC on the system where this configuration is entered.
Use additional sheets if you need to list more nailed PAD connections.