Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Preparing to Configure DTCs

Configuring Worksheets

Chapter 2

Configuring Worksheets

Before you start NMMGR, use the worksheets provided here to gather the necessary configuration

information. Make copies of these worksheets and fill in the parameter information, then use the

worksheets to guide you through configuration in NMMGR. Chapter 3 “Configuring DTCs

Step-by-Step” contains a description of all the fields referenced in these worksheets.

Node Names and PAD Access List Worksheets

List the node names of all the system that will be allowed access through the PAD Access Lists. Up to

32 nodes can be entered in this table. Only those nodes added to this list will be allowed to be defined

in the following PAD Access list.

Figure 2-1 DTS Node Names Worksheet

DTS Node Names Worksheet

Node names

_________________________________________________

Use additional worksheets if you have more than 8 systems.