Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Preparing to Configure DTCs
Defining the DTC
Chapter 2
42
The valid card types for DTC 16 and DTC 48 are:
D for direct connect cards (up to 8 ports per card),
M for modem connect cards (up to 6 ports per card),
X for DTC/X.25 Network Access cards (for connection)
DTC Event Logging For each DTC, logging class 1 logs catastrophic events and will
always be enabled. Class 2 logs critical events; class 3 logs non-critical
events; classes 4 and 5 log informative events and clas s6 provides
statistical information. It is recommended that you only enable classes
4 through 6 when you encounter problems, because they will generate
and log a substantial number of events. The log files could use a
significant amount of disk space.
Event logging classes do not apply for access to an HP 3000 in an
MPE/iX host-based management environment using a DTC16RX; any
values entered in these fields for the DTC 16RX will be ignored.