Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Introduction
Connections via PAD Support
Chapter 1
25
• MPE_B has the X.25 subaddress 02, but has not been entered in the PAD switching
table
• System C has the IP address 128.12.100.1 and the X.25 subaddress of 03
The following table and diagram show what happens depending on the address entered
by the user at the terminal connected to the remote PAD.
Table 1-1 PAD Address Examples
User at terminal
types
... Result
@123456 The user is connected to the DTC user interface
@12345601 The user is connected directly to MPE_A
@12345602 The X.25 address is not defined in the list, so the call is
connected to the DTC user interface, and the user can connect
to MPE_A or System C from there.
@12345603 The user is connected directly to System C