Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Error Messages
Validation Error Messages
Appendix B
200
Cause: The X.25 table in the DTC specified in NMMGRpath cannot be processed. Too
many PAD Switching entries are already configured.
Action: Go to DTC configuration screen and delete the entries until only the specified
number remain in NMMGRpath.
(DTSERR 105) Path: NMMGRpath — Too many PAD Incoming Security table entries found. Maximum
is 512.
Cause: The X.25 table in the DTC specified in NMMGRpath cannot be processed. Too
many PAD Incoming Security table entries are already configured.
Action: Go to DTC configuration screen and delete the entries until only the specified
number remain in NMMGRpath.
(DTSERR 106) Path: NMMGRpath —Node Name field must begin with a letter on card c for X.25
address xxxxx.
Cause: The format of the Node Name on the screen specified by NMMGRpath for the
entry with the specified X.25 address is invalid.
Action: Go to specified screen and fix the format of the entry.
(DTSERR 107) Path: NMMGRpath —Invalid ldev number for PAD device on card c.
Cause: The logical device (ldev) number is outside the allowed range of 2 to 4679.
Action: Go to the screen specified in NMMGRpath and modify the ldev number.
DTSERR 108) Path: NMMGRpath — Did not find expected X.25 address in an entry on card c.
Cause: An entry on the screen specified by NMMGRpath does not have the required
X.25 address filled in.
Action: Go to the screen specified in NMMGRpath and add an X.25 address to the
entry.