Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Migrating from Previous Releases
Migrating your Configuration to Host-Based Management
Appendix A
184
ACTION: DO NOT run the Host Migration tool. On the DTCs that are migrated
from the PC, you must run NMMGR and assign valid ldev numbers to
the nailed TIO Ports and PAD devices.
You have a Non-managed DTC I
In this case you can have two possibilities: The non-managed DTC is one of the DTC that
you are migrating from the PC; the non-managed DTC is managed from another
platform.
The non-managed DTC is being migrated from the PC The non-managed DTC is the one
you are migrating from the PC and you want to keep the configuration of this DTC, the following
actions will merge the port configurations into the configuration migrated from the PC.
ACTION: DO NOT run the Host Migration tool. Run NMMGR and ensure that the DTC in
the Host-based tree has a different DTC name than the DTC Label on the DTC
to be migrated from the PC. Then use the migration file generated by the PC to
add the configurations for the DTC from the PC.
1.
Use the NMMGR Copy Subtree function to copy the following paths:
Source Path:DTS.DTC.SELECT.<Host DTC>.CARD012
Target Path:DTS.DTC.SELECT.<PC DTC>.CARD012
Overwrite existing subtree [Y]
and
Source Path:DTS.DTC.SELECT.<Host DTC>.CARD345
Target Path:DTS.DTC.SELECT.<PC DTC>.CARD345
Overwrite existing subtree [Y]
Where <Host DTC> is the DTC Name of the non-managed DTC in the
NMCONFIG file and <PC DTC> is the DTC Label of the DTC that was
migrated from the PC.
2.
After performing the Copy Subtree, delete the non-managed DTC from the
NMCONFIG file.
The non-managed DTC is being managed from another platform. In this case the
configuration of the DTC is managed by a management platform other than the PC from which
you will migrate the DTC configuration and you want this DTC to continue to be managed by that
platform.
ACTION: DO NOT run the Host Migration tool. Run NMMGR and ensure that the DTC
in the Host-based tree has a different DTC name than the DTC Label on any
DTC to be migrated from the PC.
Process for Migrating from PC-Based to Host-Based DTC
Management
The following is the process for migrating the configuration from the OpenView DTC
Manager PC to an HPe3000 host.
On the Target MPE
System
1. This process will need to use FTP to transfer a file from the PC to the host. Ensure
that the ARPA services are running:
: showjob