Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Managing Networks with DTCCNTRL
Obtaining Status Using DTCCNTRL
Chapter 7
160
Obtaining Status Using DTCCNTRL
The DTCCNTRL STATUS function displays the current status of each DTC/X.25 Network
Access card installed in a specified DTC. The command displays the DTC type (16, 48 or
72MX) and the software module that is currently active on any DTC/X.25 Network
Access cards that are installed. (Asynchronous cards installed in the DTC are not
displayed.)
Figure 7-1 shows the display resulting from a DTCCNTRL STATUS command issued against
a DTC 48 containing DTC/X.25 Network Access cards in slots 3, 4, and 5. Card 3 shows
no X.25 network functions active. Card 4 has both X.25 system-to-system and PAD
support active. Card 5 has only system-to-system support active.
Figure 7-1 DTCCNTRL Status Display
DTC Type: DTC48
CARD #
3 none
4 PADSUP+X.25
5 X.25