Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Managing Networks with DTCCNTRL
Dynamic Configuration
Chapter 7
154
Table 7-1 Dynamically Configurable Tasks
Task
Action Required for Change to
Become Active
Add/configure new terminal/printer
Add/delete class name
Change DTC event logging class
Host-based X.25 configuration changes:
• System to System Local Users Group
• System to System Switching
• remote X.25 addresses and security
• PAD Switching
• PAD Incoming Security
• PAD Access Lists
Change SNMP filter
Change NLIO from N to Y in terminal profile
Increase number of non-nailed TIO/PAD ports
No action; changes take effect
dynamically
Change terminal to printer or vice versa*
Change device profile characteristics:
• change line speed
• change term type file name/number
• change modem type
• change speed/parity
• change hardware handshaking
• change reset HP terminal
• change allow :HELLO logon
• change record width
Delete:
• terminal/printer*
•ldev*
•DTC*
Decrease number of non-nailed TIO/PAD ports*
Logoff any sessions or close any jobs
associated with changed devices. If
device is a printer, stop the spooler.
* For these changes, the device must
not be owned when dynamic
configuration is invoked. The
terminals must be logged off and the
printers must be not spooled.