Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Managing Networks with DTCCNTRL
DTCCNTRL Parameters
Chapter 7
151
STOPBOTH Deactivates both X.25 and PAD support services on
the specified card.
STATUS Displays information about the DTC, including type
(16, 48 or 72MX), X.25 cards, and whether X.25 or
PAD support is active on the cards.
CARD=cardnum Required if FUNC is one of STARTX25, STARTPADSUP,
STARTBOTH, STOPX25, STOPPADSUP, or STOPBOTH.
Specifies the X.25 card number on which the FUNC operation is to be
performed.
FORCED=foption Optional. If FUNC is SHUTDOWN specifies whether all active ldevs
will be aborted. If FUNC is one of STARTX25, STARTPADSUP,
STARTBOTH, STOPX25, STOPPADSUP or STOPBOTH. Specifies
whether the operation will be performed even if another user is
accessing the DTC Manager.
N Default. If FUNC is SHUTDOWN, DTS shutdown is
not attempted if there are active ldevs. If FUNC is a
PAD or X.25 support service, the function is not
performed if another user is accessing the DTC
Manager.
Y If FUNC is SHUTDOWN, causes all active ldevs to be
aborted on DTS shutdown. For shutdown, this option
can only be invoked from the command line. If FUNC
is a X.25 or PAD support function forces the X.25 or
PAD support function to occur even if another user is
accessing the DTC Manager.