Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Configuring X.25 Links Step-by-Step
Configure Neighbor Gateways
Chapter 6
146
1. In the Gateway name field, enter the name of a gateway that is on the same network
as the node that you are configuring.
2. If you are adding the identified gateway for the first time, press the
[Add]
key. If you
are modifying the configuration of this node, press the
[Modify]
key. The Neighbor
Gateway Reachable Networks screen will be displayed. Proceed to “Identify
Neighbor Gateway Reachable Networks.”
3. Repeat steps 1 and 2 for each gateway that is on the same network as the node that
you are configuring. When you have finished, press the
[Next Screen]
key to return to
the X.25 Configuration screen.
Fields Gateway name Each gateway name can be as long as eight alphanumeric characters.
The first character must be alphabetic.
Identify Neighbor Gateway Reachable Networks
NMMGR displays the Neighbor Gateway Reachable Networks screen (Figure 6-8) when
you press the
[Add]
key or the
[Modify]
key for a valid gateway name from the Neighbor
Gateways screen.
Figure 6-8 Neighbor Gateways Screen
1. In the Neighbor Gateway IP Internetwork Address field, enter the IP address of
the gateway specified on the Neighbor Gateways screen. An example is:
C 192.007.007 001