Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Terminal and Printer Profiles
DTC PAD Profiles
Chapter 4
120
32 No PAD test
No init profile
X.3 setting
Data forward default
Used at a connection initialization.
Recommended if you want to keep the profile set
before connection establishment.
To use this profile with iX, verify that the PAD
supports the setting of the idle timer to 1/20
seconds, if you want to use terminal types such as
TT22 or TT26.
34 No PAD test
Init profile
X.3 setting
Data forward default
Used at connection initialization.
Recommended for more performance at the
connection initialization, or if the PAD doesn’t
support the setting of multiple Set and Read, or if
the PAD can’t answer during the “test of PAD”
sequence in accordance with the X.29
recommendations. For example, a PAD which
answers with an X.29 PAD error at a parameter
instead of setting the “error bit”.
To use this profile with iX, the PAD must support
the setting of the idle timer to 1/20 seconds, if you
want to use a terminal type such as TT22 or TT26.
48 No PAD test
No init profile
No X.3 setting
Data forward default
Used at connection initialization and during data
transfer.
50 No PAD test
Init profile
No X.3 setting
Data forward default
Used at connection initialization and during data
transfer.
Table 4-5 Printer PAD Profiles (Continued)
Profile Definition Usage