Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Terminal and Printer Profiles
DTC PAD Profile Field
Chapter 4
112
DTC PAD Profile Field
The profile number used by the PAD is the decimal value of the binary number
calculated from Table 4-3 as done by the
[Compute Byte]
function key. An “x” in a box
means that the value doesn’t matter: that is, the values of the bits are not dependent on
each other. Bit 7 is reserved for future use, and is set to 0. Note that you can only use
certain combinations: meaningless or dangerous combinations are blocked and cannot be
entered.
Terminal with init profile se t;Bit 0 is 1=1
Data forwarding 3:127 4:0;Bi t 2 is 1=4
X.3 setting allowe d;Bit 4 is 0=0
No PAD test during connection initializ ation;Bit 5 is 1 = 32
------------------------
Profile number = 37
Table 4-3 PAD Profile Field
7 6 5 4 3210 Bit Position
(128) (64) (32) (16) (8) (4) (2) (1) (Bit Value)
0 x 1 x x x 0 0 Printer without init profile set
0 x x x x x 0 1 Terminal with init profile set
0 x x x x x 1 0 Printer with init profile set
0 x 1 x x x 1 1 Terminal without init profile set
0 x x x 0 0 x x Data forwarding default
0 x x x 0 1 x x Data forwarding 3:127 4:0
0 x x x 1 0 x x Data forwarding 4:1
0 x x x 1 1 x x Data forwarding 4:2
0 x x 0 xxxxX.3 setting
0 x x 1 xxxxNo X.3 setting
0 x 0 x xxxxPAD test during connection
initialization
0 x 1 x xxxxNo PAD test during connection
initialization