Communicator e3000 MPE/iX Release 7.5 (Software Release C.75.00) (30216-90336)

Chapter 4

Fibre Channel Device and Adapter Support on HP e 3000 Systems

Using HP Support Tools Manager (STM) with Fibre Channel Adapters

This section describes how to use STM to gather information about the Fibre Channel adapters and diagnose

problems. If you are not familiar with STM, check out the new STM MPE/iX Quick Reference Guide at the

following URL: http://docs.hp.com/hpux/diag. Then select MPE/iX Diagnostics.

NOTE Use the CSTM command to start STM in Command Line Mode.

PUB:CSTM

CSTM B8343AA.75.00 Version created MON, JAN 28, 2002 12:02 PM

Running Command File (/usr/sbin/stm/ui/config/.stmrc).

This operation may take approximately one minute.

-- Information --

MPE/iX Support Tools Manager --Product Number B8343AA, Version A.75.00

Use of this program is subject to the licensing restrictions described in "Help-->On Version". HP shall

not be liable for any damages resulting from misuse or unauthorized use of this program.

• The Information tool provides data about a Fibre Channel adapter without resetting the adapter.

The following is an example information log for a e3000/A500-200-14 system: (user input in BOLD)

cstm>MAP

Dev Last Last Op

Num Path Product Active Tool Status

=== ================= ====================== =========== =======

1 system system ()

2 0 PCI Bus Adapter (582)

3 0/0 PCI Bus Adapter (782)

4 0/0/1/0 PCI SCSI Interface (10000

5 0/0/1/0.16.0 Unknown ()

6 0/0/1/0.17.0 Unknown ()

7 0/0/1/1 PCI SCSI Interface (10000

8 0/0/1/1.15.0 SCSI Disk (SEAGATEST39204

9 0/0/2/0 PCI SCSI Interface (10000

10 0/0/2/0.6.0 Unknown ()

11 0/0/2/1 PCI SCSI Interface (10000

12 0/0/2/1.6.0 Unknown ()

13 0/0/2/1.15.0 SCSI Disk (SEAGATEST39204

14 0/2 PCI Bus Adapter (782)

15 0/2/0/0 PCI 100 BaseT LAN Interfa

16 0/4 PCI Bus Adapter (782)

17 0/4/0/0 PCI SCSI Interface (10000