Communicator e3000 MPE/iX Release 7.5 PowerPatch 2 (Software Release C.75.02) (30216-90352)

Chapter 1

Overview — MPE/iX Release 7.5 PowerPatch 2 (C.75.02)

Overview — MPE/iX Release 7.5

PowerPatch 2 (C.75.02)

This Communicator HP e3000 provides general and detailed information on the new and enhanced

functionality for the MPE/iX Release 7.5 PowerPatch 2 (C.75.02) as well as information on support, release

strategy and installation prerequisites.

This Communicator should be used in conjunction with the Communicators from Release 7.5. Only

information relating to the Release 7.5 PowerPatch 1 and 2 is contained in this document. If you have

additional questions beyond the scope of this document, please review the information in the Communicator

for Release 7.5. This document is available online at www.docs.hp.com.

This MPE/iX Communicator describes the following:

• Enhanced Host-based DTC Management Fubctionality

• High Availability FailOver/iX for FC Disk Arrays

• Support for HP SureStore Virtual Array 7110 and 7410 on the HP e3000

• Limited support for Ultrium tape on MPE/iX