Communicator e3000 MPE/iX Release 7.0 Express 1 (Software Release C.70.01) (30216-90328)

76 Chapter4
PCI-SCSI Device Adapter Cards
SCSI Device Configuration Examples for N-Class and A-Class HP e3000 Systems
CLASS: LP PP
LDEV: 10 DEVNAME: OUTDEV: LP MODE: JA
ID: JOBTAPE_ID RSIZE: 128 DEVTYPE: TAPE
PATH: 0/0/1/0.17.0 MPETYPE: 24 MPESUBTYPE: 2
CLASS: JOB JOBTAPE
From the screen output shown in “Console Display #4” it can be seen that we have another
disk drive at path “1/10/0/0.4”. The MPE/iX SCSI configuration address of this device
must include a SCSI LUN which is implied to be zero since it is not shown. So our
configuration path will be “1/10/0/0.4.0”. In Sysgen you would enter the following
commands:
io> ap 1 id=pat_ioa_bc
io> ap 1/10 id=pat_pci_bc
io> ap 1/10/0 id=pci_device
io> ap 1/10/0/0 id=A4800A << This is the Device Adapter Card (ID from Example #1)
io> ap 1/10/0/0.4 id=pseudo __/ pair of entries per stand alone device
io> ad 100 path=1/10/0/0.4.0 id=hpc2490wd \ pair of entries per stand alone device