APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

208 AppendixB
Sample Configuration
HP 3000 Configuration
APPC: Dependent LU Session Type Data Screen
Figure B-22 shows the “APPC: Dependent LU Session Type Data”
screen for session type DEPSESS1. Two APPC sessions are configured to
activate automatically at subsystem startup. Beyond the automatically
activated sessions, two more sessions can be activated before the
maximum session limit for DEPSESS1 is reached. See Chapter 5 ,
“Managing the APPC Subsystem,” for more information on session
activation.
The SNA node name (HOSTPU) configured in this screen must first be
configured in the “SNA Node Configuration” screen. The LUs associated
with DEPSESS1 are configured in the “APPC: Dependent LU List Data”
screen. They must first be configured in the “SNA Node Configuration:
LU Data” screen for HOSTPU.
The sessions of type DEPSESS1 use mode type MODE0. Mode type MODE0
is internally defined, so it is not explicitly configured in the “APPC:
Select Mode Type” and “APPC: Mode Type Data” screens, shown later
in this appendix. For more information on mode types and mode type
configuration, see Chapter 4 , “APPC Subsystem Configuration,” of this
manual.
Figure B-22 Example Dependent LU Session Type Screen