APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

Appendix B 191
Sample Configuration
HP 3000 Configuration
SNA Node Configuration: PU Data and LU Data Screens
Figure B-5 shows the “SNA Node Configuration: PU Data” screen for
node HOSTPU. The Node Type for HOSTPU is configured as 2.0, because
all the LUs using this node are dependent LUs. Independent LUs must
be configured on Type 2.1 nodes.
If you wanted to configure both independent and dependent LUs on the
same node, you would configure it as a Node Type 2.1, and you would
specify Y in the Node 2.1 Dependent LU Support field.
Figure B-5 Example SNANODE PU Data Screen (HOSTPU)