Using VPLUS: An Introduction to Forms Design (32209-90004)

3-19
Figure 3-17. The ORDER Form, Batch Record No. 1
Change Initial Value
You can change the initial value by typing a new value over the value
that appears in the field. However, it is more likely that you need to
change only the last two or three digits of this value. To do this, use
a cursor control key to place the cursor under the first digit you want
to change and then type in the new characters.
Action
Change the order number to 100001 by changing the last digit to 1, as
shown in Figure 3-17.