Using VPLUS: An Introduction to Forms Design (32209-90004)

3-16
Action
Change the field type of each field to R for required and change the data
type of each field to NUM2. Press ENTER for each Field Menu to record
these changes.
These are all the changes to be made in this section.
Action
Press MAIN/RESUME to return to the Main Menu.
Figure 3-15. The Main Menu
Action
Type X in the selection box, as shown in Figure 3-15. Press ENTER to
compile ORDFORM1. When the compile is complete, press EXIT to exit
FORMSPEC.
At this point, the forms file ORDFORM1 with the new ORDER form is
compiled and can be used for order entry through ENTRY. The fields are
edited as shown in Table 3-8. The next step is use ENTRY to enter data
into a batch file using the new form.