Using the Node Management Services (NMS) Utilities (32022-90053)

Chapter 5 85

Using NMMGR in Maintenance Mode

ADDNODE

IP address The IP address of the remote node. A node may have

several IP addresses, one for each path report. The

format of the address is the same as the IP address in

the Network Directory Data screen. It must be enclosed

in quotes (“ ”) if it is not entered interactively.

additional

address type The numerical type associated with each type of

additional address on the Network Directory Data

screen. If there is no additional address associated with

the node you are adding, enter a 1 (the default). If there

is an additional address, enter the number

corresponding to the type of the address. The types are

as follows:

1 No additional address (default, IP

address only)

2 LAN/IEEE802.3

3 X.25

4 NS/SNA

5 LAN/ETHERNET

additional

address The additional address, if any, to be associated with the

IP address speciﬁed for the node name. If the address is

of type LAN/IEEE802.3 or LAN/ETHERNET, then the

additional address is an IEEE802.3 or ETHERNET

address with the format xx-xx-xx-xx-xx-xx, where x is a

hexadecimal digit (0–9, or A–F). If the address type is

X.25, then an X.25 address key name must be speciﬁed

here.

Example

To interactively add a path report for the node named

NODE1.XLNET.ACCTG (user input is italicized):

NMMGR> OPENDIR NSDIR.NET.SYS

NMMGR> ADDNODE

Enter node name (or press return to exit):

ADDNODE> NODE1.XLNET.ACCTG

Enter IP address:

ADDNODE> C 192.000.001 002

Enter additional address type,

(1-IP, 2-LAN/IEEE802.3, 3-X.25, 4-NS/SNA,

5-LAN/ETHERNET, (default is 1):