Using the Node Management Services (NMS) Utilities (32022-90053)
Chapter 3 53
Using NMMGR in Screen Mode
Selecting a Configuration Path
• Configure or modify a network interface.
If you choose to create or modify an NS configuration using unguided
(manual) configuration, you must take care that you know which
screens you need to use to completely create or modify a configuration.
The unguided nature of manual configuration makes it possible to get
“lost” or to miss some necessary screens entirely.
Under most circumstances, HP recommends that you use guided
configuration. Unguided configuration can be useful, however, if you
only need to use a few screens and you know exactly which screens you
need.
Refer to the NS 3000/iX Screens Reference Manual for information on
the unguided NS configuration screens.
Configuring HP-IBM Connections
Hewlett-Packard provides a number of networking products that make
it possible to establish communication links between HP 3000
Series 900 and IBM mainframe computers.
If you press the key labeled
[IBM] at the Main screen, you are sent to the
HP-IBM Configuration screen shown in Figure 3-7.
Figure 3-7 HP-IBM Configuration Screen