Using the Node Management Services (NMS) Utilities (32022-90053)

296 AppendixA
NMS Error Messages
FMT Error Messages
MESSAGE: Range error at position shown; other values accepted if
allowed
4028 CAUSE: One of the numbers you entered was out of range; a “^^”
indicator appears below the illegal number. The number entered was
probably much too large.
ACTION: The bad value was not accepted. You may press the Return
key to keep the other values on the same line, or else retype the entire
input using only legal values.
MESSAGE: Syntax error at position shown; other values accepted if
allowed
4029 CAUSE: Some of the numbers on the input line contained illegal
characters, or were separated by illegal characters. Legal inputs are
digits 0–9 and the question mark “?”. Legal separators for a list are the
comma “,” and the blank “ ”.
ACTION: Retype the input.
MESSAGE: Invalid set number NN; reenter all or hit RETURN to keep
others
4030 CAUSE: One of the filter-set numbers you selected is not one of the valid
filter sets for this formatter.
ACTION: Check your input against the available sets shown in the
menu. You may press the Return key to keep the other number(s) you
entered on the same line, or you may retype the entire input. You may
also return to the main menu and “set all options back to their default
values.”
MESSAGE: Output limit out of range; enter another number or hit
RETURN
4031 CAUSE: You have selected a value which is less than the lower output
limit or greater than the upper output limit.
ACTION: The value you selected was not accepted. Reenter a value
which is within the range shown in the prompt. The prompt is meant as
a reminder; values up to 4096 are also legal.
MESSAGE: Invalid option number NN ignored; others accepted
4032 CAUSE: One of the option numbers you selected at the main menu was
not a valid option number for this formatter.
ACTION: The illegal option number was ignored, but any other options
on the same line were executed. Check your input and retype if
necessary.
MESSAGE: Number of inputs exceeds storage capacity, rest ignored
4033 CAUSE: Bug in Trace-Formatter numeric input processing. The
formatter could not process all the numbers entered by the user.