Using the Node Management Services (NMS) Utilities (32022-90053)

270 AppendixA
NMS Error Messages
NMMGRVER Messages, Errors and Warnings
configuration files need it. However, the NM intrinsic failed during this
process. One possible reason for this is that the configuration file may
be full.
ACTION: Run NMMGRVER again. If the error still occurs, submit a
Service ReRun NMMGR and expand the size of the configuration file.
Then run NMMGRVER again.
MESSAGE: Unable to purge LINKCONF subtree (NMMGRVERERR 20)
NMMGRVERERR
20
CAUSE: Internal error. File has been converted. However, in the
attempt to purge the subtree LINKCONF, the NM intrinsic failed.
ACTION: The configuration file may be corrupted. Restore a backup
copy of the configuration file if possible and run NMMGRVER again. If
the error still occurs, see “Submitting an SR” at the beginning of this
appendix.
MESSAGE: Error accessing NMMGRCAT.PUB.SYS set=! msg=!.
(NMMGRVERERR 21)
NMMGRVERERR
21
CAUSE: Returned by NMCPRINTERRMSG. Usually followed by one or
more of messages 22 through 25 below, which further clarifies the error.
ACTION: Look for one or more of NMMGRVERERR 22 through 25
following this message, and take the remedial action suggested below.
Look up the text and comments for the original message specified in the
message, and take the suggested actions.
MESSAGE: FOPEN FSERR ! on NMMGRCAT.PUB.SYS.
(NMMGRVERERR 22)
NMMGRVERERR
22
CAUSE: Returned by NMCPRINTERRMSG and usually followed by the
text of the FSError message.
ACTION: If the error number is 1 or 2, NMMGRVERERR 24 will also
be displayed. See the NMMGRVERERR 24 causes and actions for
further information. Returned by NMCPRINTERRMSG.
MESSAGE: Encountered GENMESSAGE error !. (NMMGRVERERR 23)
NMMGRVERERR
23
CAUSE: Possible bad software installation (NMMGRCAT.PUB.SYS).
ACTION: If the error number is not 1 or 2, look up the error number in
the MPE Intrinsics Manual under GENMESSAGE. The problem may
be due to a corrupt NMMGRCAT.PUB.SYS. Restore NMMGRCAT.PUB.SYS
and run NMMGRVER again. Otherwise, correct the problem causing
the GENMESSAGE error and run NMMGRVER again.
MESSAGE: GENMESSAGE encountered FSERR !.
(NMMGRVERERR 24)
NMMGRVERERR
24
CAUSE: Returned by NMCPRINTERRMSG. This message follows
NMMGRVERERR 23 message, and is usually followed with the text of
the file system error message as well.