Using the Node Management Services (NMS) Utilities (32022-90053)

Appendix A 261
NMS Error Messages
NMGR Error and Warning Messages
ACTION: Check to see that you are accessing the correct field, or
reduce the size of the data you are entering.
MESSAGE: There are Vplus field edit errors. (NMGRERR 510)
NMGRERR 510 CAUSE: UPDATECONF error.
ACTION: Examine all WRITECONF statements before the screen
associated with the UPDATECONF which caused the error. One or
more of these fields does not match the edits which are associated with
this field. Go to the NMMGR screen which corresponds to the path for
further explanation of the Vplus error.
MESSAGE: Field number must be a positive integer. (NMGRERR 511)
NMGRERR 511 CAUSE: A READCONF or WRITECONF error occurred.
ACTION: Check to see if the field number entered is greater than zero.
MESSAGE: Missing closing quote. (NMGRERR 512)
NMGRERR 512 CAUSE: A closing quote is needed.
ACTION: Retype the erroneous string with a closing quote.
MESSAGE: Must open config file before executing this command.
(NMGRERR 514)
NMGRERR 514 CAUSE: The user tried to perform some maint mode command like
SUMMARYCONF, COMPRESSCONF, PATHCONF, etc. that requires an open
file.
ACTION: Open a config file with the OPENCONF command first.
MESSAGE: Unexpected parameter encountered. (NMGRERR 550)
NMGRERR 550 CAUSE: You specified an invalid LDEV range while using the
SUMMARYCONF command to obtain a DTS critical summary report on a
range of logical devices.
ACTION: Reenter the SUMMARYCONF command with a correctly
specified LDEV range. The LDEV range must be separated by a slash.
(Example: SUMMARYCONF DTS,LDEV 35/83)
MESSAGE: The parameters for this command must be an integer.
(NMGRERR 551)
NMGRERR 551 CAUSE: While using the SUMMARYCONF command to obtain a DTS
critical summary report, you specified one or more of the parameters as
a non-integer. The correct format for the LDEV specification is LDEV
[xxx[/yyy]], where xxx and yyy are integers.
ACTION: Reenter the command with the parameters specified as
integers.