Using the Node Management Services (NMS) Utilities (32022-90053)

256 AppendixA
NMS Error Messages
NMGR Error and Warning Messages
ACTION: Use NMMGR to go to the path which you specified in the
PATHCONF command. Make sure that your field count matches the field
number you are trying to access. Make sure you are not trying to use
Vplus field numbers to access the field.
MESSAGE: Path not specified, or path specified does not exist.
(NMGRERR 390)
NMGRERR 390 CAUSE: PATHCONF was not previously issued.
ACTION: Check to see if you set the path with the PATHCONF
command. Check to see if the path that you specified exists in the
configuration file
MESSAGE: Version stamp in VERSIONCONF does not match NMMGR
version. (NMGRERR 391)
NMGRERR 391 CAUSE: Version stamp must match NMMGR version.
ACTION: Change the version stamp in your batch file to match the
version displayed on the NMMGR banner line.
MESSAGE: VERSIONCONF must be called before this command may
be called. (NMGRERR 392)
NMGRERR 392 CAUSE: Tried to perform OPENCONF before VERSIONCONF.
ACTION: Call VERSIONCONF with the version stamp which NMMGR
displays on the banner line.
MESSAGE: Missing or invalid destination path name. (NMGRERR 393)
NMGRERR 393 CAUSE: The copyconf command will not operate without a valid
destination path.
ACTION: Check to make sure an NMCONF path name was specified
for the copyconf command.
MESSAGE: Missing or invalid destination file name. (NMGRERR 394)
NMGRERR 394 CAUSE: The copyconf command will not operate without a valid
destination file name.
ACTION: Check to make sure that an MPE file name was specified
after the colon (:) delimiter in the copyconf command.
MESSAGE: Invalid option specified for copyconf command.
(NMGRERR 395)
NMGRERR 395 CAUSE: An option other than KEEP was specified.
ACTION: Retry with valid option.
MESSAGE: Cannot open the nodelist file. (NMGRERR 400)
NMGRERR 400 CAUSE: The nodelist file could not be opened for read/write access.
ACTION: See the accompanying file system error message for
resolution.