Manualshelf

Using the Node Management Services (NMS) Utilities (32022-90053)

ManualsBrandsHP ManualsSoftwareMPE/iX 6.5 Operating System
231232233234235236237238239240
238 AppendixA
NMS Error Messages
NMGR Error and Warning Messages
MESSAGE: The Network interface must be of type X.25.
(NMGRERR 237)
NMGRERR 237 CAUSE: The operation is illegal if the NI is not an X.25 link.
ACTION: Check to make sure that the NI is an X.25 link.
MESSAGE: Data must be entered and Saved before continuing.
(NMGRERR 240)
NMGRERR 240 CAUSE: While running guided configuration, the user tried to press
Next Screen without first pressing Update Data while at the path
SNANODE.nodename.
ACTION: Enter the correct data and press Update Data.
MESSAGE: The NI Name must be specified. (NMGRERR 250)
NMGRERR 250 CAUSE: At the Guided HP Configuration screen, the user attempted to
fine tune the parameters for an NI configuration without specifying the
NI name in the NI Name field.
ACTION: Enter a valid NI name in the NI Name field and press the
FineTune Parms key again.
MESSAGE: The NI Name does not exist in the configuration file.
(NMGRERR 251)
NMGRERR 251 CAUSE: The user attempted to perform an operation on an non-existent
NI. Either the NI is not configured or the specified NI name is incorrect.
ACTION: Specify the correct NI name of a configured NI and try again.
MESSAGE: The NI Name already exists and is of another type.
(NMGRERR 253)
NMGRERR 253 CAUSE: The user attempted to create an NI using an NI name that has
already been configured for another NI of a different type.
ACTION: Specify an NI name that has not already been used and try
again.
MESSAGE: This link name is used by another NI; select another
name. (NMGRERR 254)
NMGRERR 254 CAUSE: While configuring an NI, the user specified a link name that
has already been configured for a different NI and cannot be shared.
ACTION: Specify a different link name and try again.
MESSAGE: A link name must be entered. (NMGRERR 255)
NMGRERR 255 CAUSE: The user attempted to update the configuration file without
specifying a link name, which is required for this screen.
ACTION: Enter a link name in the Link name field and try again.