Using the Node Management Services (NMS) Utilities (32022-90053)

Appendix A 231
NMS Error Messages
NMGR Error and Warning Messages
MESSAGE: IP Subnet Mask of 255.255.255 is not allowed.
(NMGRERR 126)
NMGRERR 126 CAUSE: An IP Subnet Mask of 255.255.255 was entered. This is not a
legal mask.
ACTION: Re-enter the mask with a different value.
MESSAGE: If Node 2.1 Dependent LU Support, then LU #’s must be
blank. (NMGRERR 127)
NMGRERR 127 CAUSE: If the PU Type is 2.1 and the PU Dependent Support is N, then
there cannot be any LU Numbers associated with the LU names.
ACTION: Make all the LU Numbers blank and try again.
MESSAGE: Invalid SNA LU Name Format. Must be
XXXXXXXX.XXXXXXXX. (NMGRERR 128)
NMGRERR 128 CAUSE: The user entered an invalid SNA LU name. The SNA LU Name
must be in the format of AXXXXXXX.AXXXXXXX, where A is any alpha
character and X in any alphanumeric character.
ACTION: Make all the LU Numbers blank and try again.
MESSAGE: No previous page. (NMGRERR 130)
NMGRERR 130 CAUSE: The user pressed the PREV PAGE function key on a paged
data screen and there was no previous page of data.
ACTION: None.
MESSAGE: Ldev of ! is not valid. Valid range is -1 to 4679.
(NMGRERR 131)
NMGRERR 131 CAUSE: The user entered an Ldev that is out of range.
ACTION: Re-enter an Ldev within the allowed range.
MESSAGE: Names can only be 16 characters long. (NMGRERR 132)
NMGRERR 132 CAUSE: The user entered a name in a field that allows more characters
than a valid name allows. This field is usually used for more than one
type of entry. The program believes that the user is trying to store a
name that is too long.
ACTION: Enter a new name 16 characters or shorter.
MESSAGE: Allowed name chars are “A”..“Z”, “0”..“9”, “_” and “-”.
(NMGRERR 133)
NMGRERR 133 CAUSE: The user has tried to enter a name with invalid characters in
it.
ACTION: Enter a name with valid characters.