Using the Node Management Services (NMS) Utilities (32022-90053)

Appendix A 227
NMS Error Messages
NMGR Error and Warning Messages
CAUSE: The file number was changed in NMMGR but not entered in
the table.
ACTION: See “Submitting an SR” at the beginning of this appendix.
MESSAGE: Internal error: Midas file number not in file table.
(NMGRERR 101)
NMGRERR 101 CAUSE: The file number was not located in a search through the table.
It is likely that a file number was changed in NMMGR but not entered
in the table.
ACTION: Exit NMMGR, and rerun NMMGR and try to observe what
damage has been done. Repair if possible or restore the configuration
file. If the problem still exists, see “Submitting an SR” at the beginning
of this appendix.
MESSAGE: Internal error: Unable to remove closed file from file table.
(NMGRERR 102)
NMGRERR 102 CAUSE: An attempt to clear the file table of a closed file failed.
ACTION: Exit NMMGR. It is possible that no damage occurred. Rerun
NMMGR. If the problem still exists, see “Submitting an SR” at the
beginning of this appendix.
MESSAGE: Internal error: NMMGR file table inconsistent.
(NMGRERR 103)
NMGRERR 103 CAUSE: On trying to access the file table, an error was found in the
table. This will happen at open time if an attempt is made to put a file
into the file table and if the slot in the table is already occupied.
ACTION: Exit NMMGR. It is possible that no damage occurred. Rerun
NMMGR. If the problem still exists, see “Submitting an SR” at the
beginning of this appendix.
MESSAGE: Netxport has locked the file; cannot begin guided task;
wait. (NMGRERR 104)
NMGRERR 104 CAUSE: The network transport is being started using the file that
NMMGR has open as the active configuration file. A guided dynamic
update cannot be started until the transport has been started.
ACTION: Wait until the transport is started and then try again.
MESSAGE: The file has been locked; type ‘STOP’ to abort, or wait.
(NMGRERR 105)
NMGRERR 105 CAUSE: Either the transport is being started using the file NMMGR
has open as the active configuration file, or NMMGR is processing a
guided dynamic update which cannot continue until the transport has
been started.
ACTION: Wait until the transport is started and then try again.