Using the Node Management Services (NMS) Utilities (32022-90053)

Appendix A 193
NMS Error Messages
NM Error Messages
MESSAGE: Unable to find port for NMFILE process. (NMERR 97)
NMERR 97 CAUSE: Returned by all NMCONF procedures. Error detected on
DICTSEND.
ACTION: See “Submitting an SR” at the beginning of this appendix.
MESSAGE: Subsystem does not support version checking.
(NMERR 100)
NMERR 100 CAUSE: Returned by NMVERSCHECK. Coding error by caller of
NMVERSCHECK. The SUBSYSID parameter must refer to a
subsystem number that has a second level version cross check routine.
ACTION: See “Invalid Software Installation” at the beginning of this
appendix.
MESSAGE: Fix levels differ in one or more modules. (NMERR 101)
NMERR 101 CAUSE: There is a version mismatch between the various modules of
the subsystem. Incorrect installation of the subsystem software.
ACTION: See “Invalid Software Installation” at the beginning of this
appendix.
MESSAGE: Update levels differ in one or more modules. (NMERR 102)
NMERR 102 CAUSE: There is a version mismatch between the various modules of
the subsystem. Incorrect installation of the subsystem software.
ACTION: See “Invalid Software Installation” at the beginning of this
appendix.
MESSAGE: Version levels differ in one or more modules.
(NMERR 103)
NMERR 103 CAUSE: There is a version mismatch between the various modules of
the subsystem. Incorrect installation of the subsystem.
ACTION: See “Invalid Software Installation” at the beginning of this
appendix.
MESSAGE: One or more subsystem modules are missing.
(NMERR 104)
NMERR 104 CAUSE: A module required for normal operation of the subsystem is
missing.
ACTION: See “Invalid Software Installation” at the beginning of this
appendix.
MESSAGE: One or more subsystem modules are invalid.
(NMERR 105)
NMERR 105 CAUSE: An error has occurred trying to read the version ID of one or
more of the subsystem’s modules. An I/O error, disk error, or similar has
prevented reading the version stamp correctly.