Manualshelf

Using the Node Management Services (NMS) Utilities (32022-90053)

ManualsBrandsHP ManualsSoftwareMPE/iX 6.5 Operating System
191192193194195196197198199200
Appendix A 191
NMS Error Messages
NM Error Messages
MESSAGE: File associated with this transaction is locked.
(NMERR 77)
NMERR 77 CAUSE: Returned by: NMCONFADDDATA, NMCONFUPDATEDATA,
NMCONFPURGEDATA, NMCONFADDPATH,
NMCONFPURGEPATH, NMCONFRENAMEPATH. Some other
process has the NMCONF type file locked.
ACTION: Wait until the file is unlocked by the other user(s) before
proceeding.
MESSAGE: No data associated with this identifier. (NMERR 78)
NMERR 78 CAUSE: Returned by: NMCONFGETDATA, NMCONFDATALENGTH,
NMCONFPURGEDATA, NMCONFUPDATEDATA. NMFILE detected
NMFSERR 18. This may not be an error if the call to these procedures
was using this return to test if data was associated with the identifier.
If it was an error, it could be due to corruption of the database.
ACTION: If file corruption is suspected, see “Corrupt Configuration
File” at the beginning of this appendix.
MESSAGE: Buffer length parameter out of allowable range.
(NMERR 82)
NMERR 82 CAUSE: Returned by NMCONFGETDATA. Length parameter is longer
than 8192 or less than 7. Probable internal error by caller.
ACTION: See “Submitting an SR” at the beginning of this appendix.
MESSAGE: Transaction table is full. (NMERR 83)
NMERR 83 CAUSE: Returned if the maximum number of transactions via
NMCONF are already opened, and a call to NMCONFOPEN is made.
ACTION: See “Corrupt Configuration File” at the beginning of this
appendix.
MESSAGE: Data structures internal error in NMFILE. (NMERR 85)
NMERR 85 CAUSE: Returned by most NMCONF procedures.
ACTION: See “Submitting an SR” at the beginning of this appendix.
MESSAGE: Switch to CM failed. (NMERR 86)
NMERR 86 CAUSE: Returned by native mode NMS procedures if an error is
returned by SWITCH.
ACTION: See “Submitting an SR” at the beginning of this appendix.
MESSAGE: CM data segment improperly mapped to NM object.
(NMERR 87)
NMERR 87 CAUSE: Returned by native mode NMWRITETRACE if an error is
returned by wrap-dst.
ACTION: See “Submitting an SR” at the beginning of this appendix.