Using the Node Management Services (NMS) Utilities (32022-90053)

152 Chapter7
NMDUMP
Formatting Options
Link Subsystem Formatting
The link manager subsystem does not call any menus. NMDUMP formats
logging messages only. The first line labels the error as a link manager
error, and shows whether it is fatal or non-fatal. The next line contains
the time and date of the event. This line is followed by the log message,
the requestor ID, the link name, and the logical device (LDEV) of the
link.
The requestor ID is for internal use only. Any underlying errors are
reported below the LDEV field. Many messages correspond to NMERR
messages that are documented in Appendix A, “NMS Error Messages,”
of this manual.
RJE 1 Enables printing of frames sent and frames
received on the datacomm line.
2 Enables printing of all port messages sent
to the driver by the RJERCS intrinsics and
other entities, or sent to them by the driver.
3 Enables printing of changes in internal
state within the RJE driver modules.
4 Enables printing of details related to
internal processing of internal driver
requests, mainly those related to utility
functions (not datacomm I/O).
5 Enables printing of all calls to all RJERCS
intrinsics (such as ROPEN) and all buffer
data written to or read from the RJE
driver.
51 Enables printing of frames sent and frames
received on the datacomm link.
52 Enables printing of all state changes not
already shown under set 51, and any other
information traced by the downloaded
Bisync firmware.
99 Produces a full trace.
0 Disables all filter sets and produces a
listing of error only.
Subsystem Number Filter Description