Using the Node Management Services (NMS) Utilities (32022-90053)

148 Chapter7
NMDUMP
Formatting Options
See Table 7-4 for a description of trace options.
Table 7-4 Trace Options
Subsystem Option Meaning Description
802.3, 802.5,
FDDI,
100VG-AnyLAN,
100Base-T
1 Change Filters Allows definition of what characters
each packet must match before it will be
formatted.
2 Change Output Flags Allows reduction of output by selecting
which parts of filtered packets to format
NETXPORT,
NetIPC,
Network Services
5 Type or Descriptor Format events for a particular type
(NETXPORT) or descriptor number
(NetIPC, NS).
6 Entity or Service Format events for a particular entity
(NETXPORT) or service (NS).
7 Event or PIN Format events for a particular event
(NETXPORT) or PIN (NetIPC, NS).
Call for network services displayed.
8 Port ID or PIN Select a Port ID or PIN in hexadecimal
format. Default = OFF.
9 Display Summary
Output
Allows a summary report of log entries
either in additions to or instead of the
normal formatting of log entries.
Default = OFF.
10 Save or Use Filter
File
Allows saving of the filter option
definitions to a file for later use or using
previously saved filter file. 1= Use filter
file, 2= Save filter file.
11 Source IP Address Allows specification of a source IP
address for header trace messages.
Default = OFF.
12 Destination IP
Address
Allows specification of a destination IP
address for header trace messages.
13 Source TCP Port Allows specification of a source TCP
address for header trace messages.
14 Destination IPC Port
NS Messages
Allows specification of a destination
TCP address for header trace messages.
ON = NS messages displayed. OFF =
NetIPC intrinsic calls for Network
services displayed.
Network Services
Only
8 Format NS Messages
Only
Toggle ON and OFF. ON = Only Disply
NS Protocols, (VT, NFT, RFA, PTOP)
OFF = Also Display NetIPC Intrinsic
Level Activity