Using the Node Management Services (NMS) Utilities (32022-90053)

146 Chapter7
NMDUMP
Formatting Options
See Table 7-2 for a description of logging options.
Table 7-2 Log Options
Subsystem Option Meaning Description
802.3, 802.5,
FDDI,
100VG-AnyLAN,
100Base-T
1 Linknames Select logging options by Linknames. @
= ALL
2 Excluded Linknames Select Linkname to be excluded from
logging.
3 Log Classes Error message options (ERRORS,
WARNINGS, INFO, ALL)
4 Set Output Level Toggle between Terse and Verbose.
Verbose = Detail report, Terse =
Summary.
SDLC, LAP-B,
RJE/BSC
1 Linknames Select logging options by Linknames. @
= ALL
2 Class Selection 10 = Errors, 12 = Informational, 99 =
ALL
NetIPC,
Network Services,
NETXPORT
5 Class Selection Show LOG formatter memo with LOG
classes configured within NMMGR.
6 Entity or Module Select specific entities (NETXPORT) or
modules (NS) to format for logging.
7 Event or PIN Select event (NETXPORT) or PIN
(NetIPC, NS) where error occurred.
NETXPORT Only 8 Port ID or PIN Select a Port ID or PIN in hexadecimal
format. Default = OFF.
9 Display Summary
Output
Allows a summary report of log entries
either in additions to or instead of the
normal formatting of log entries.
Default = OFF.
10 Save or Use Filter
File
Allows saving of the filter option
definitions to a file for later use or using
previously saved filter file. 1= Use filter
file, 2= Save filter file.
Link No options