Using the Node Management Services (NMS) Utilities (32022-90053)

126 Chapter5
Using NMMGR in Maintenance Mode
SUMMARYCONF
SUMMARYCONF
Prints a summary report for one or more communications subsystems.
Syntax SUMMARYCONF subsystem[, subsystem[, ...]]
Parameters subsystem The name of the subsystem(s) for which the report will
be generated. If more than one subsystem is entered, a
report will be printed for each subsystem in the order
given. If ALL is entered, a report will be printed for
every subsystem. Valid entries are ALL, DTS,
NETXPORT, SNANODE, NRJE, IMF, DHCF, APPC, and RJE.
Description SUMMARYCONF displays a summary report for a particular
subsystem. This command is identical to the Print Summary function
in the NMMGR Output Configuration screen.
Output is directed to the file defined in the file equation FORMLIST. If
FORMLIST is not defined, output is sent to $STDLIST.
When you use SUMMARYCONF to print a summary report for the
distributed terminal subsystem (DTS), you can also specify a summary
option to designate additional items in the DTS subsystem you wish to
have reported. You do so in one of two ways. The first way is to enter the
option on the same line as the command. For example:
SUMMARYCONF DTS,LINK
will cause a report to be generated for the DTS link configuration. You
can use this method regardless of whether you entered maintenance
mode from screen mode you are running a job to generate output.
You can use the second way to specify a summary option for the DTS
subsystem only if you have entered maintenance mode from screen
mode. This method is to enter SUMMARYCONF DTS at the NMMGR
maintenance mode prompt, with no option specified. A new prompt will
appear, as follows:
DTS Summary>
You can enter the DTS print option at this prompt. If you do not want to
generate any additional DTS reports, enter E[XIT] at the prompt. You
will be returned to the maintenance mode prompt.
The following DTS print summary options are available:
ALL Displays all DTS configuration information.
DTC [dtcname]
Displays the configuration for all DTCs or for the DTC
whose name is specified in dtcname.
DTS Displays the DTS subsystem configuration parameters.