UPS Utility Manual

Example #5
- AC Power Failure, Command File Completed
This example shows a status display following an incoming AC power failure condition at one of the UPS devices,
and after
the configured "Powerfail Command File" has completed its execution.
In this case, you can see in the UPS MONITOR PROCESS STATUS that the System Power State is "Power has
failed,"
the configured "Powerfail Grace Period" timer has expired, and the "Powerfail Command File" has run to completion.
The UPS DEVICES STATUS portion of the display shows that
UPS LDEV #23 has reported an "AC Power Fail"
hardware status condition, and so its Power condition field has been changed to Failed.
--------------------------------------------------------------------------
UPSUTIL: Command > status
--------------------------------------------------------------------------
Begin display of UPS Monitor status.
UPS MONITOR PROCESS STATUS:
UPS Monitor Operating State : Running (PIN = 196)
UPS Monitor Version Number : 9 3 UPS Devices Configured
System Power State : Power has failed. 3 UPS Devices Monitored
Powerfail Recovery Messages : All terminals. 3 UPS Devices Allocated
Configuration File Name : UPSCNFIG.PUB.SYS ( Config File Ok )
Powerfail Command File Name : MYPFAIL.PUB.MYACCT ( Pfail Cmd File Ok )
Powerfail Command File Parms: [inventory_data_set orders_data_set]
Powerfail Grace Period (secs: 300
Powerfail Grace Timer : Completed. TUE, FEB 12, 2002, 10:22 AM
Powerfail Command File : Completed. TUE, FEB 12, 2002, 10:23 AM
Action on UPS Low Battery
: Keep Running
UPS DEVICES STATUS:
UPS# Ldev# Alloc Init State Power Hardware Status
~~~~ ~~~~~~ ~~~~~ ~~~~ ~~~~~~~~~~~~ ~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 22 Yes Yes Monitoring Normal AC Power Normal
2 23 Yes Yes Monitoring Failed AC Power Fail
3 24 Yes Yes Monitoring Normal AC Power Normal
End display of UPS Monitor status.
--------------------------------------------------------------------------
UPSUTIL: Command >
Page
38
of
48
UPS Utility
7/18/2008
http://jazz.external.hp.com/papers/upsutil.htm