TurboIMAGE/XL Database Management System Reference Manual MPE/iX V6.5 (30391-90011)

Appendix A 617
Error Messages
Utility Error Messages
MESSAGE ROLLBACK MUST BE DISABLED BEFORE AUTODEFER CAN BE ENABLED
MEANING Deferred output option (AUTODEFER) cannot be used when the database
has been enabled for ROLLBACK.
ACTION Disable ROLLBACK and enable AUTODEFER using DBUTIL. (Refer to
chapters 7 and 8 for more information on AUTODEFER.)
MESSAGE ROLLBACK MUST BE DISABLED BEFORE LOGGING CAN BE DISABLED
MEANING An attempt was made to disable logging while rollback was still enabled.
ACTION Use the DBUTIL DISABLE command to disable the database for
ROLLBACK, then logging.
MESSAGE ROOT FILE DOES NOT EXIST
MEANING A root file with the name of the specified database does not exist in the
logon group and account.
ACTION Check the database name you specified and reenter the command.
MESSAGE SEQUENCE ERROR ON LOG RECORD #
n - EOF ASSUMED
MEANING Log record numbers are out of sequence.
ACTION Notify the database administrator and HP support personnel. One likely
cause is that a log file has been altered, or that a start recovery operation
was not performed after a system failure.
MESSAGE TIMESTAMP OUT OF SEQUENCE ON LOG RECORD
#n - EOF ASSUMED.
MEANING Log record timestamps are out of sequence.
ACTION Notify the database administrator and HP support personnel. One likely
cause is that a log file has been altered, or that a start recovery operation
was not performed after a system failure.
MESSAGE TOO MANY PARAMETERS
MEANING Too many parameters were entered with the command.
ACTION Reenter the command with the correct number of parameters.