TurboIMAGE/XL Database Management System Reference Manual MPE/iX V6.5 (30391-90011)

Appendix A 609
Error Messages
Utility Error Messages
MESSAGE LOGID MUST NOT BE LONGER THAN 8 CHARACTERS
MEANING The logid name is too long.
ACTION Retype the correct logid to set into the database.
MESSAGE LOGID PASSWORD IS INCORRECT
MEANING The password has been altered, or you are using the wrong password.
ACTION Set the logid with the correct password into the database.
MESSAGE LOGGING IS ENABLED, CAN NOT CLEAR LOGID
MEANING The logid cannot be changed while logging is in process in order to ensure
validity of recovery and logging.
ACTION Change the logid after the recovery process has completed.
MESSAGE LOG PERIOD DOES NOT EQUAL ONE (1)
MEANING Internal error.
ACTION Contact your database administrator.
MESSAGE MAINTENANCE WORD CANNOT BE CHANGED UNTIL RECOVERY HAS
COMPLETED
MEANING Changing maintenance word was attempted when recovery was enabled.
ACTION After the recovery process has completed use the DBUTIL SET command
to change the maintenance word.
MESSAGE MAINTENANCE WORD REQUIRED
MEANING The user invoking the utility is not the creator of the referenced database
and has not supplied a maintenance word.
ACTION If DBUTIL, reenter the command with the maintenance word. Otherwise
correct the error or press return to terminate the program.
MESSAGE MAINTENANCE WORD TOO LONG
MEANING The specified maintenance word has more than eight characters.
ACTION Reenter the command with the correct maintenance word.