TurboIMAGE/XL Database Management System Reference Manual MPE/iX V6.5 (30391-90011)

588 AppendixA
Error Messages
Library Procedure Error Messages
MESSAGE CRITICAL READ ERROR ON data set
MEANING While reading database file, MPE file read error was encountered.
ACTION Notify the database administrator and possibly HP support personnel.
Save FID information if it is printed. You might need to perform database
recovery procedures. (See chapter 7).
MESSAGE ERROR
intrinsic name STATUS return status ;
DBERROR/DBEXPLAIN FAILED I
info S subsys
MEANING The specified intrinsic encountered an error. ERROR displays the intrinsic.
STATUS is the return status from the intrinsic. The application called
either DBERROR or DBEXPLAIN. The switch to Native Mode failed. I is the
error number returned by the subsystem. S is the subsystem that failed.
ACTION Notify HP support personnel.
MESSAGE ESCAPE FROM TURBOIMAGE/XL; PC:
$pcode CODE: $escape code
MEANING A hardware or software trap occurred. pcode and escape code are hex
numbers. The first four hex digits represent the error code; the last four
represent the subsystem number.
ACTION Notify the database administrator and HP support personnel if necessary.
Save the escape code number.
MESSAGE HPUNLOADCMPROCEDURE FAILED ON
intrinsic name INFO info
SUBSYS subsystem
MEANING A problem was encountered when switching to Compatibility Mode (CM).
INFO is the error returned by the subsystem. SUBSYS is the subsystem
which failed.
ACTION Notify HP support personnel.
MESSAGE LABEL WRITE ERROR ON
data set
MEANING Unable to complete the writing of a user label on database file.
ACTION Notify the database administrator and HP support personnel if necessary.
MESSAGE LOST FREE SPACE IN
data set
MEANING Internal software inconsistency caused unused record locations in data set
to become lost or unavailable. File information display is printed for the
data set.
ACTION Notify the database administrator and HP support personnel if necessary.