Troubleshooting Terminal, Printer and Serial Device Connections - Edition 4 (32022-90030)

82 Chapter 4
TermDSM Commands
S[TATUS] DT[C]
S[TATUS] DT[C]
Obtains configuration and status information about a particular DTC.
Security level: 2.
Syntax
DT[C] dtcnum
Parameter
dtcnum This is the number TermDSM associates with a
particular DTC. The DTC command lists each DTC with
its assigned number. This is also printed when you
make a mistake while typing in a DTC number.
Description
When this subcommand is entered, a large amount of information
related to the DTC is printed on the terminal.
The following is a brief explanation of key fields printed on the
terminal:
• Machine Type. The HP product number of the DTC.
• DTC Node Name. The user-assigned node name of the DTC.
• NOVRAM Value. A code that indicates location of Nodal address
and Boot Multicast address within DTC RAM.
• Nodal address. 802.3 station address of the DTC.
• Boot Multicast address. 802.3 multicast address which DTC uses
when requesting its code file.
• Host Node Address. 802.3 address of MPE/iX system that
downloaded the DTC.
• DTC Lan Multicast Addresses. These fields will be used by DTC
diagnostics in future releases.
• Selftest Status Readout. Provides results of most recent DTC
selftest. The first two columns list and identify SIC cards. The next
two columns show status of the SICs. For details on the DTC selftest
readout, refer to the description of the DIAG Selftest DTC
subcommand.
• Version Numbers. The version numbers of hardware and software
modules on the DTC.