Troubleshooting Terminal, Printer and Serial Device Connections - Edition 4 (32022-90030)

66 Chapter 4
TermDSM Commands
DU[MP] M[UX]
DU[MP] M[UX]
Captures data pertaining to a particular asynchronous processor board
(mux card) of a DTC 72MX to a disk file. This command is supported for
DTC 72MX only.
Security level: 2.
Syntax
M[UX] dtcnum, boardnum
Parameters
dtcnum Number of the DTC to which the board is installed.
This is the number TermDSM associates with this
DTC.
boardnum Number of the asynchronous processor board (mux
card) within the DTC 72MX. The boards are numbered
from zero beginning at the bottom of the DTC.
Description
When this subcommand is entered, the following message will be
printed on the terminal:
Warning: This will abort all users on that MUX. As many as
24 users will be affected. (TDM 49). Do you want to continue
(yes/no)?
If you respond no, the DUMP prompt will be repeated for you to enter
another DUMP subcommand. If you respond yes, the dump continues.
When the dump is complete, the following information will be
displayed:
Please deliver the following MUX dump to your HP representative.
Mnhhhhhc.PUB.SYS
Where n is the board number within the DTC, hhhhh is the last five
hexadecimal digit of the DTC's LAN address, and c is a character in the
sequence a, b, ...z to allow multiple dumps.