Troubleshooting Terminal, Printer and Serial Device Connections - Edition 4 (32022-90030)

Chapter 4 63
TermDSM Commands
DU[MP] DT[C]
DU[MP] DT[C]
Captures data pertaining to a particular DTC and writes it to a disk
file.
Security level: 1.
Syntax
DT[C] dtcnum
Parameter
dtcnum The number TermDSM associated with a particular
DTC. The DTC command lists each DTC with its
assigned number. This list is also printed when you
make a mistake while typing in a DTC number.
CAUTION This subcommand resets all sessions on the DTC under test.
Description
When this subcommand is entered, the following message will be
printed on the terminal:
Warning: This will reset all users on that DTC. (TDSM 44)
Do you want to continue (yes or no)?
If you respond no, the DUMP prompt will be repeated for you to enter
another DUMP subcommand. If you respond yes, the dump continues
after the following message:
The DTC dump can take as long as 7 minutes .....
After the dump, a selftest is done on the DTC and status on each card is
displayed.
The DTC dump information is placed in two files. The first file contains
information about the part of the DTS software that resides on the host
(the HP 3000). When the dump of this information is complete, the
following information will be displayed:
The following two files make up the DTC dump. Please
deliver both to your HP representative: (TDSM 64)
Shhhhhhc.PUB.SYS
TRMdddll.PUB.SYS
where hhhhhh is the last six hexadecimal digits of the DTC’s LAN
address and c is a character in the range from A to Z. The ddd is the
Julian day of the year and ll is a two-character string in the range:
AA, AB, AC, ..., BA, BB, BC, ..., ZZ