Troubleshooting Terminal, Printer and Serial Device Connections - Edition 4 (32022-90030)

Chapter 4 61
TermDSM Commands
DU[MP]
DU[MP]
Captures data pertaining to a particular port, asynchronous processor
board (mux card of a DTC 72MX), DTC, or logical device number and
writes it to a disk file.
Security level: 1 for DTC dump; 2 for remaining dump functions.
Syntax
DU[MP]
Description
After the Dump command is entered, the following prompt is printed on
the terminal:
(dump)
Ldev #
POrt #,#,#
SNp #,#
Mux #,#
Vc #,#,#
DTc #
(carriage return to exit) ?
These are the subcommands that can then be entered. The following
pages describe each of these options.
If you press [Return] instead of one of the subcommands, you will be
returned to the major prompt and may then enter another TermDSM
command.
There are five different types of dump files:
• Information regarding a particular DTC. This information is written
to a disk file in binary form.
• Information regarding a particular asynchronous processor board in
a DTC 72MX.
• Information regarding a particular logical device number or physical
port.
• Information regarding a particular SNP (X.25) card.
• Information regarding a particular virtual circuit on an X.25 card.