Troubleshooting Terminal, Printer and Serial Device Connections - Edition 4 (32022-90030)

Appendix A 125
TermDSM Messages
MESSAGE: TRACE will be used as X25 trace filename by default.
(TDSM 617)
(TDSM 617) CAUSE: During execution of the TRACEON function, the user pressed the
carriage return when prompted for a trace file name.
ACTION: None. This message is for information only.
MESSAGE: There is no TRACE in progress. (TDSM 618)
(TDSM 618) CAUSE: The user entered a TRACEOFF command to stop a trace but
there was no trace active.
ACTION: None. This message is for information only.
MESSAGE: You have entered an invalid ROM version. The ROM
version is made up of 8 ASCII characters. (TDSM 630)
(TDSM 630) CAUSE: During execution of the reprogramming EEPROM process, the
user entered an invalid ROM version.
ACTION: Enter a valid ROM version for the reprogramming EEPROM
process.
MESSAGE: The ROM version is missing or invalid. The ROM version
is made up of 8 ASCII characters. (TDSM 631)
(TDSM 631) CAUSE: During execution of the reprogramming EEPROM process, the
user failed to enter a ROM version or entered an invalid ROM version.
ACTION: Enter a valid ROM version for the reprogramming EEPROM
process.
MESSAGE: TermDSM did not set the DTC to IDLE during EEPROM
reprogramming. (TDSM 634)
(TDSM 634) CAUSE: Internal error.
ACTION: Contact your HP support representative.
MESSAGE: The EEPROM reprogramming was successfully
completed. (TDSM 635)
(TDSM 635) CAUSE: This message is for information only.
ACTION: None. This message is for information only.
MESSAGE: The EEPROM reprogramming process is executing. The
process takes about 7–10 minutes. Warning: Interrupting the process
can be fatal to the DTC. (TDSM 636)
(TDSM 636) CAUSE: Warning message.
ACTION: None. This message is for information only.
MESSAGE: TermDSM will now reprogram EEPROM with version XXX.
(TDSM 637)
(TDSM 637) CAUSE: If you continue, all user sessions on this DTC will be aborted.