Troubleshooting Terminal, Printer and Serial Device Connections - Edition 4 (32022-90030)

116 Appendix A
TermDSM Messages
MESSAGE: DTCM produced an unknown action code. (TDSM 309)
(TDSM 309) CAUSE: Internal error.
ACTION: Contact your HP support representative.
MESSAGE: Unable to get an outbound packet buffer. (TDSM 317)
(TDSM 317) CAUSE: Internal error.
ACTION: Contact your HP support representative.
MESSAGE: Unable to write to an outbound packet buffer. (TDSM 318)
(TDSM 318) CAUSE: Internal error.
ACTION: Contact your HP support representative.
MESSAGE: Unable to send an LLIO message. (TDSM 319)
(TDSM 319) CAUSE: Internal error.
ACTION: Contact your HP support representative.
MESSAGE: DTCM encountered an unspecified error. (TDSM 320)
(TDSM 320) CAUSE: Internal error.
ACTION: Contact your HP support representative.
MESSAGE: DTCM captured an unknown escapecode. (TDSM 321)
(TDSM 321) CAUSE: Internal error.
ACTION: Contact your HP support representative.
MESSAGE: DTC configuration file too large for buffer. (TDSM 322)
(TDSM 322) CAUSE: Internal error.
ACTION: Contact your HP support representative.
MESSAGE: Please reset or dump the specific PAD VC from ldev
option. (TDSM 323)
(TDSM 323) CAUSE: The user attempted to reset or dump a PAD VC using the VC
subcommand. PAD connections can only be dumped or reset from the
Ldev subcommand.
ACTION: Determine the ldev number that is associated with the PAD
connection and retry the reset or dump operation using the Ldev
subcommand.
MESSAGE: The system is a HOST BASED X25. However the specified
DTC has no SNP card. (TDSM 324)
(TDSM 324) CAUSE: There is no DTC/X.25 XL Network Access (SNP) card mounted
in the DTC that you specified in the TermDSM command.