System Debug Reference Manual (32650-90888)

326 Chapter9
System Debug Window Commands
L Ldev window.
NMP NM program window (from CM).
P Program window (current mode).
Q CM frame window, Q relative.
R CM registers window.
S CM stack window, S relative.
SR NM special registers window.
TX Text file window.
U User-defined window.
V Virtual address window.
Z Real memory window.
Put window abbreviations and window operations together to form the desired
command. For example:
PB Program Backward - scroll program window backward.
PF Program Forward - scroll program window forward.
PL Program Lines - change the program window size.
VH Virtual Home - return virtual window to the home position.
VN Virtual Name - assign a name to a virtual window.
VW Virtual Where - define a virtual window.
ZR Z(R)eal Radix - change the radix for the real window.
• Defining User Windows:
Append the desired addressing mode to the UW
m command:
UWA User window, ABS relative
UWCA User window, CST relative
UWCAX User window, CSTX relative
UWD User window, DST relative
UWDB User window, DB relative
UWQ User window, Q relative
UWS User window, S relative
UWV User window, Precision Architecture virtual address
UWZ User window, Precision Architecture real memory address
The Debug window commands are described in detail in the remainder of this chapter. The
commands are listed in alphabetical order. Note that all individual window operation
commands are constructed by preceding the window operation with the abbreviation for
the desired window. To signify this, all window operation commands are listed as
w X, where