System Debug Reference Manual (32650-90888)

Chapter 5 185
System Debug Command Specifications Fx-LOG
INITxx
%nmdebug > ignore; {wl 111; wl 22q; wl 333; wl 444}
$111
Expected a number, variable,function, or procedure (error #3720)
undefined operator is:"22q"
$333
$444
In this example, the IGNORE command is used to protect the entire command list that
follows it. Even though the second command in the list produces an error, execution of the
rest of the list continues. By default, the option LOUD is assumed, and all resulting error
messages are displayed.
%nmdebug > ignore quiet; {wl 111; wl 22q; wl 333; wl 444}
$111
$333
$444
In this example, the IGNORE QUIET command is used to protect the command list that
follows it AND to suppress all error messages. Note that the error encountered when
attempting to write the value "22" is silently ignored, and the command list execution
continues.
%nmdebug > ignore quiet; use unwind
In this example, the IGNORE QUIET command is used to protect the execution of all
commands found within the USE file unwind. If this use file uses additional USE files, the
commands in those additional USE files are also protected.
%nmdebug > ignore quiet; printsum (200 tablesize("mytable"))
In this example, the IGNORE QUIET command is used to protect the following command
that invokes a macro named printsum. All commands within this macro are protected. In
addition, all commands within the macro function tablesize are protected.
Limitations, Restrictions
none
INIT xx
Privileged Mode
Initialize registers from a specified location.
Syntax
INITNM virtaddr [ISM |PIMREAL |PIMVIRTUAL]
INITCM virtaddr [ISM |PIMREAL |PIMVIRTUAL]
INITNM TCB
INITCM TCB | CMG | REGS
This command is for use by experienced DAT users and internals specialists to initialize