System Debug Reference Manual (32650-90888)

160 Chapter4
System Debug Command Specifications :-Exit
ERRL[IST]
Syntax
ERRL[IST] [ALL]
Parameters
ALL By default, only the most recent (set) of errors are displayed. If the special
option ALL is specified, all sets of errors are displayed.
Examples
$nmdat > dv a.234e0
Display error. Check ERRLIST for details. (error #3800)
$nmdat > errl
$47: Display error. Check ERRLIST for details. (error #3800)
$47: data read access error (error #805)
$47: READ_CMWORD bad address: $ VIRT a.234e0
$47: No dump file set is opened (error #5083)
Display error information from the error stack about the last error. Useful additional error
information is often available in the error stack. In this example, we see that several error
lines were stacked for command number $47. The display command failed because no
dump has been opened.
$nmdat > errl all
$47: Display error. Check ERRLIST for details. (error #3800)
$47: data read access error (error #805)
$47: READ_CMWORD bad address: $ VIRT a.234e0
$47: No dump file set is opened (error #5083)
$22: Error evaluating a predefined function. (error #4240)
$22: function is"vtor"
$22: wl vtor(pc)
^
$22: Virtual-to-real translation failed. (error #6013)
$1f: Unknown topic for HELP. (error #1488)
$1c: This command is invalid for this program. (error #6115)
$1c: Program: DAT
$1c: mv a.c00012c4
^
$17: File system error opening an old file. (error #1302)
$17: NONEXISTENT PERMANENT FILE (FSERR 52) [LOADMACS]
Display all entries in the error stack. Multiple stacked errors are displayed, along with the
command numbers that caused the errors. Errors are recorded for commands $47, $22,
$1f, $1c, and $17.
Limitations, Restrictions
The error stack is implemented as a ring, with a total of 10 elements.